Publications

The following publications are registered for the group faculty in DTU Orbit.

Publikationer rss feed

2024
  PDF

Cases of sensor fault assessment

Lydakis, E. ; Amador, S. D. R. ; Koss, H. ; Tarpø, M. ; Brincker, R.
in: Journal of Physics: Conference Series, vol: 2647, issue: 18
Presented at:
EURODYN 2023

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2024     |    DOI: https://doi.org/10.1088/1742-6596/2647/18/182025

  PDF

Data-driven sensor fault diagnosis for vibration-based structural health monitoring under ambient excitation

Lydakis, Emmanouil ; Koss, Holger ; Brincker, Rune ; Amador, Sandro D.R.
in: Measurement: Journal of the International Measurement Confederation, vol: 237

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2024     |    DOI: https://doi.org/10.1016/j.measurement.2024.115232

  PDF

Rheological characterization of temperature-sensitive biopolymer-bound 3D printing concrete

Christ, Julian ; Perrot, Arnaud ; Ottosen, Lisbeth M. ; Koss, Holger
in: Construction and Building Materials, vol: 411

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2024     |    DOI: https://doi.org/10.1016/j.conbuildmat.2023.134337

  PDF

Screening of natural polymers as binder in concrete composites

Christ, Julian ; Engelsen, Thor ; Thybring, Emil Engelund ; Ottosen, Lisbeth M. ; Koss, Holger
in: Construction and Building Materials, vol: 441

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2024     |    DOI: https://doi.org/10.1016/j.conbuildmat.2024.137405

 

Vibration-Based Damage Detection of a Monopile Specimen Using Output-Only Environmental Models

Lydakis, Emmanouil ; Amador, Sandro D. R. ; Koss, Holger ; Brincker, Rune
part of: Topics in Modal Analysis & Parameter Identification, Volume 9, pages: 163-168, 2024
Presented at:
41st IMAC

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2024     |    DOI: https://doi.org/10.1007/978-3-031-34942-3_20

2023
  PDF

3D printing of bio-based concrete composites for construction

Christ, Julian

Type: Ph.D. thesis

Status: Published     |    Year: 2023

  PDF

Multi-axial 3D printing of biopolymer-based concrete composites in construction

Christ, Julian ; Leusink, Sander ; Koss, Holger
in: Materials and Design, vol: 235

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2023     |    DOI: https://doi.org/10.1016/j.matdes.2023.112410

  PDF

Snow and Wind

Fiebig, Jennifer

Type: Ph.D. thesis

Status: Published     |    Year: 2023

2022
  PDF

Cross-flow aerodynamics of bridge cables with wire meshes

Matejicka, Lubomir ; Koss, Holger H. ; Georgakis, Christos T.
in: Journal of Wind Engineering and Industrial Aerodynamics, vol: 223

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2022     |    DOI: https://doi.org/10.1016/j.jweia.2022.104941

2021
 

10 Years Research and Application in the Climate Wind Tunnel

Koss, Holger ; Kim, Taeseong ; Larsen, Søren Vestergaard ; Georgakis, Christos T.
part of: Proceedings of the Danish Society for structural Science and Engineering, pages: 47-94, 2022

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2021